Product Introduction

Ultra-High Performance Concrete (UHPC), also known as Reactive Powder Concrete (RPC), is one of the most innovative cement-based engineering materials developed in the past three decades, marking a significant leap in material performance. UHPC can achieve compressive strengths of 100-150 MPa. To reach this performance, the water-to-cement ratio must be reduced to below 0.2, resulting in a very high viscosity concrete that requires special water-reducing agents. Our company has developed the MPUP-45 high-performance superplasticizer, which, through special molecular design, adjusts the thickness of the water film adsorbed on the surface of powder particles and utilizes liquid-phase superlubrication. This allows UHPC to maintain good flowability even with an ultra-low water-to-cement ratio, greatly improving the workability and construction methods of UHPC materials.

Physical and Chemical Properties

• Appearance: Pale yellow viscous liquid

• Solid content: 45±1%

• Specific gravity: 1.10 g/ml

• pH value: 5-7

• Chloride ion content: ≤0.05%

Packaging and Storage

1. Sealed packaging in plastic drums, 200 kg/drum, ton tanks, or as per customer requirements.

2. The minimum recommended storage temperature is 0°C. Avoid freezing and thawing.

3. The product’s shelf life is one year.

Disclaimer

The technical parameters provided in this product manual are based on the laboratory results of our company and are for customer reference only. Customers should conduct trial mixing experiments based on actual engineering conditions to determine the optimal dosage before use.