Product Introduction

This product is a water-based dispersion of styrene-acrylic polymer, specifically designed for use with dry-mix mortars to form a two-component system. It is primarily used in waterproofing applications for indoor areas, basements, subways, tunnels, and similar environments, where it is used to prepare polymer-cement two-component waterproof coatings. It is widely used in indoor decoration, particularly for waterproofing in bathrooms and kitchens. The dosage of this product varies depending on the desired characteristics of the waterproofing system (rigid, flexible, or ultra-flexible), typically ranging from 5%, 15%, to 30%.

This product can also be used in special dry-mix mortars such as self-leveling floor materials, repair mortars, thermal insulation mortars, and tile adhesives, with a recommended dosage of 2-20%.

Product Features

1. Appearance: White aqueous emulsion with a solid content of 50-55%.

2. Usage: Directly mixed into mortars, with a recommended dosage of 2-30% by weight of the cementitious material, depending on the specific project requirements.

3. The product has good compatibility with cement in mortars and is compatible with other admixtures.

4. Benefits: Significantly enhances the bonding strength, impermeability, crack resistance, and other performance characteristics of mortars.

Packaging and Storage

1. Packaging: Sealed in plastic drums, available in 50kg/drum, 200kg/drum, or ton containers, or according to customer requirements.

2. Storage: Store at a minimum temperature of 0°C to avoid freezing and thawing.

3. Shelf Life: One year.

Disclaimer

The technical parameters provided in this product manual are based on tests conducted by our laboratory and are for customer reference only. Customers should perform trial mixes based on actual project conditions to determine the optimal dosage before use.